After installation and commissioning fast Boiler professional and technical personnel, two hot water steam cooking equipment bed stream boilers to provide our bodies quickly into the orbit of the normal operation. Meanwhile, the design of energy-saving equipment also effectively improve the thermal efficiency of the boiler, saved us a huge amount of fuel costs. --customer feedback

Flue gas condensation heat recovery unit, with a lower temperature of the water or air cooling the flue gas, the flue gas temperature is reduced to achieve close heat transfer surface area, condensation of water vapor in the flue gas, the sensible heat of flue gas while achieving release of latent heat of condensation and water vapor release, while water or air absorbs heat in the heat exchanger is heated to achieve heat recovery, improve the thermal efficiency of the steam cooking equipment bed stream boiler.

To ensure safe operation of the gas steam steam cooking equipment bed stream boiler at the same time, also to achieve energy saving operation, as follows: 1, gas boiler blowdown number of not too much, to avoid excessive heat loss; 2, during boiler operation, the proposed transfer large, small load transfer operation, shutdown is not recommended, and the like start continuous operation; 3, fireman to be noted that the boiler water quality monitoring, timely replacement of the resin, the effect to ensure the operation of the boiler; 4, note that the monitoring of exhaust gas temperature, the temperature is too high will take away the smoke a lot of heat, wasting nor environmentally friendly.

Former industrial steam cooking equipment bed stream boiler operation needs to be done what needs to be done before what things industrial boilers run? Industrial boiler combustion is an important part of the heating medium to provide thermal power. If the operator is not skilled technical, operational errors do not even know the safe operation of boiler technology will cause serious boiler accidents. So before running industrial boilers, industrial boilers before running what needs to be done? First, managers need to boilers and boiler technicians familiar with the structure used in certain boilers, performance, and at the same time have a high sense of responsibility. At the same time, we must do the following work: pre-industrial boilers and ready to run the test - test before the ignition for a new boiler installation, repair, or after a long shutdown, must be carefully checked before the fire which is to ensure that the boiler. safe operation, and to avoid a failure of technology into the operation of an important part of the accident. Check and prepare the inner portion inside the boiler 1. Check the pipe before ignition, such as a steam separator, a continuous sewage pipe (sewer ground), a conventional sewage, separators and the like into the water before the desired industrial boiler operation, should be complete and intact. 2. conduit (boiler housing, body, head, etc.), set top box and the heating surface should be cleaned of dirt, no defects or damage, the pot without tools and other debris.